...making Linux just a little more fun!
By Mike Chirico
Copyright (c) 2004 (GPU Free Documentation License)
Latest Update: http://prdownloads.sourceforge.net/souptonuts/README_Virtual_FS.html?download
Date: Sun Sep 19 01:08:31 EDT 2004
Under Linux, you can create a regular file, format it as an ext2, ext3, or reiser filesystem, and then mount it just like a physical drive. It's then possible to read and write files to this newly-mounted device. You can also copy the complete filesystem, since it is just a file, to another computer. If security is an issue, read on. This article will show you how to encrypt the filesystem and mount it with ACL (Access Control Lists), which gives you control of rights beyond the traditional read (r), write (w), and execute (x) permissions for the three user groups "file", "owner", and "other".
This is an excellent way to investigate different filesystems without having to reformat a physical drive, which means you avoid the hassle of moving all your data. This method is quick -- very quick compared to preparing a physical device. What is truly great about this technique is that you can explore different filesystems such as reiserfs, ext3, or ext2 without having to purchase an additional physical drive. Since the same file can be mounted on more than one mount point, you can also investigate sync rates.
Creating a filesystem in this manner allows you to set a hard limit on the amount of space used, which, of course, will be equal to the file size. This can be an advantage if you need to move this information to other servers. Since the contents cannot grow beyond the file, you can easily keep track of how much space is being used.
First, you want to create a 20MB file by executing the following command:
$ dd if=/dev/zero of=disk-image count=40960 40960+0 records in 40960+0 records out
A count of 40960 created a 20 MB file because, by default, dd uses a block size of 512 bytes. That makes the size: 40960*512=20971520.
$ ls -l disk-image -rw-rw-r-- 1 chirico chirico 20971520 Sep 3 14:24 disk-image
Next, to format this as an ext3 filesystem, you just execute the following command:
$ /sbin/mkfs -t ext3 -q disk-image mke2fs 1.32 (09-Nov-2002) disk-image is not a block special device. Proceed anyway? (y,n) y
You are asked whether to proceed because this is a file, and not a block device. That is OK. We will mount this as a loopback device so that this file will simulate a block device.
Next, you need to create a directory that will serve as a mount point for the loopback device.
$ mkdir fs
You are now one step away from the last step. You just want to find out what the next available loopback device number is. Normally, loopback devices start at zero (/dev/loop0) and work their way up (/dev/loop1, /dev/loop2, ... /dev/loopn). An easy way for you to find out what loopback devices are being used is to look into /proc/mounts, since the mount command may not give you what you need.
$ cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext3 rw 0 0 /proc /proc proc rw,nodiratime 0 0 none /sys sysfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 none /dev/pts devpts rw 0 0 /proc/bus/usb /proc/bus/usb usbdevfs rw 0 0 none /dev/shm tmpfs rw 0 0
On my computer, I have no loopback devices mounted, so I'm OK to start with zero. You must do the next command as root, or with an account that has superuser privileges.
# mount -o loop=/dev/loop0 disk-image fs
That's it. You just mounted the file as a device. Now take a look at /proc/mounts, you will see this is using /dev/loop0.
$ cat /proc/mounts rootfs / rootfs rw 0 0 /dev/root / ext3 rw 0 0 /proc /proc proc rw,nodiratime 0 0 none /sys sysfs rw 0 0 /dev/sda1 /boot ext3 rw 0 0 none /dev/pts devpts rw 0 0 /proc/bus/usb /proc/bus/usb usbdevfs rw 0 0 none /dev/shm tmpfs rw 0 0 /dev/loop0 /home/chirico/junk/fs ext3 rw 0 0
You can now create new files, write to them, read them, and do everything you normally would do on a disk drive. First, I'll give access to the chirico account.
# chown -R chirico.chirico /home/chirico/junk/fs
Now, under the chirico account, it is possible to create files.
$ cd /home/chirico/fs $ mkdir one two three $ ls -l total 15 drwx------ 2 chirico chirico 12288 Sep 3 14:28 lost+found drwxrwxr-x 2 chirico chirico 1024 Sep 3 14:34 one drwxrwxr-x 2 chirico chirico 1024 Sep 3 14:34 three drwxrwxr-x 2 chirico chirico 1024 Sep 3 14:34 two $ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 17G 11G 4.6G 71% / /dev/sda1 99M 83M 11M 89% /boot none 62M 0 62M 0% /dev/shm /home/chirico/junk/disk-image 20M 1.1M 18M 6% /home/chirico/junk/fs
If you need to unmount the filesystem, as root, just issue the umount command. If you need to free the loopback device, execute the losetup command with the -d option. You can execute both commands as follows:
# umount /home/chirico/junk/fs # losetup -d /dev/loop0
Before we get started with ACL, how would you set up rights on the filesystem so that users could create and save documents that others could modify? For instance, let's say that users chirico and sporkey are collaborating on a project together.
Well, you have to add everyone to the same group. You would execute commands like these:.
# groupadd sharefs # chown -R root.sharefs /home/chirico/junk/fs # chmod 2775 /home/chirico/junk/fs # usermod -G sharefs sporkey # usermod -G sharefs chirico
Note that if these changes do not take effect for your users
(for example, if they were logged in when you executed the
commands), they'll have to log out and log in again or execute the
$ newgrp sharefs" command. No big deal, right? Well,
keep reading, and see how ACL avoids this step.
More importantly, even though the old way worked for you, at some point, new users may need to be added to the project. What if some of these users only need a subset of the rights? For instance, you have developers, testers, managers, and a few special people. There are limits to what the 'rwx'-type rights can do. ACL solves a lot of these problems.
For the next steps, I will assume that you are running Red Hat Fedora Core 2. If not, reference the 2.6 kernel upgrade section below. Four things will be covered in this section:
Your installation of Fedora Core 2, by default, will be configured for loop, cryptoloop, and aes, but it is highly unlikely that you will have all of these modules loaded. So, execute the following commands to load these modules (you will need to do this as root):
# modprobe loop # modprobe cryptoloop # modprobe aes
Next, create a directory to store the files. The Reiser filesystem will require more space than the ext3 filesystem.
# mkdir /home/diskimg # cd /home/diskimg
Instead of creating the file zeroed out, like you did with the ext3 filesystem, this one is going to contain random bits, which may add a little extra security.
# dd if=/dev/urandom of=disk-aes count=102400
We need to encrypt the loop device, so you need to use losetup. You will be prompted for a password, which you will need to remember when you mount the device.
# losetup -e aes /dev/loop1 ./disk-aes Password:
This step is new also. Instead of formatting the file directly, you will format the loop device. The file stays encrypted. Again, you will be prompted to continue, so just enter "y".
# mkfs -t reiserfs /dev/loop1 mkfs.reiserfs 3.6.13 (2003 www.namesys.com) A pair of credits: Elena Gryaznova performed testing and benchmarking. The Defense Advanced Research Projects Agency (DARPA, www.darpa.mil) is the primary sponsor of Reiser4. DARPA does not endorse this project; it merely sponsors it. Guessing about desired format.. Kernel 2.6.8-1.521 is running. Format 3.6 with standard journal Count of blocks on the device: 12800 Number of blocks consumed by mkreiserfs formatting process: 8212 Blocksize: 4096 Hash function used to sort names: "r5" Journal Size 8193 blocks (first block 18) Journal Max transaction length 1024 inode generation number: 0 UUID: 435e3495-5e2e-489d-bf55-1b5f9a44b670 ATTENTION: YOU SHOULD REBOOT AFTER FDISK! ALL DATA WILL BE LOST ON '/dev/loop1'! Continue (y/n):y Initializing journal - 0%....20%....40%....60%....80%....100% Syncing..ok Tell your friends to use a kernel based on 2.4.18 or later, and especially not a kernel based on 2.4.9, when you use reiserFS. Have fun. ReiserFS is successfully created on /dev/loop1.
Create the mount point /fs, and mount this device. Note that you will be entering the acl option as well. Plus, you will prompted for a password.
# mkdir /fs # mount -o loop,encryption=aes,acl ./disk-aes /fs Password:
Ok, now take a look at the mount command. It should show up as the Reiser filesystem, encrypted, using ACL. Note that it says loop2; it mounted it on /dev/loop2, which is one above what losetup specified, /dev/loop1.
$ mount /home/diskimg/disk-aes on /fs type reiserfs (rw,loop=/dev/loop2,encryption=aes,acl)
With ACL (Access Control Lists), you have finer control over access permissions. With the rwx permission scheme, you cannot easily change rights without creating new groups to handle the users. With ACL, you can set user permissions without creating a group, and individual users can add or remove access.
These rights are set with the
setfacl command. The
command below will give the users donkey, chirico, and bozo2 access
to this new filesystem that we mounted. Again, I'm assuming that
you are using Fedora Core 2, or some distribution that is set up
# setfacl -R -m d:u:donkey:rwx,d:u:chirico:rwx,d:u:bozo2:rwx /fs
Next, create a few directories as one of the users. The example below was done as the user chirico.
$ mkdir /fs/one $ touch /fs/one/stuff $ ls -l /fs/one/stuff -rw-rw----+ 1 chirico chirico 0 Sep 3 17:48 /fs/one/stuff
Notice the plus sign in the last line. It tells us a little about who has access. So, as user chirico, the getfacl command can be executed:
$ getfacl /fs/one/stuff getfacl: Removing leading '/' from absolute path names # file: fs/one/stuff # owner: chirico # group: chirico user::rw- user:chirico:rwx #effective:rw- user:donkey:rwx #effective:rw- user:bozo2:rwx #effective:rw- group::r-x #effective:r-- mask::rw- other::---
We now see that donkey, chirico, and bozo2 have effective rights on this file. Chirico has enough rights to remove bozo2.
$ setfacl -x u:bozo2 /fs/one/stuff $ getfacl /fs/one/stuff getfacl: Removing leading '/' from absolute path names # file: fs/one/stuff # owner: chirico # group: chirico user::rw- user:chirico:rwx user:donkey:rwx group::r-x mask::rwx other::---
This is just scratching the surface of what can be done with ACL. For more information, see some of the references below.
This article will get you started with the 2.6 kernel if you are currently running Red Hat 8 or 9. You may want to take a look at it to see what is involved. If you decide to upgrade, you will need to configure your kernel for the following:
CONFIG_BLK_DEV_LOOP CONFIG_BLK_DEV_CRYPTOLOOP CONFIG_CRYPTO_AES_586
This is done in the .config file, and you can download my config file here. Just look for kernel-22.214.171.124-i686-chirico-reiserfsacl.config in the tar.gz.
In addition to upgrading the kernel, you will need the latest version of the Linux utilities. Currently, there is no need to patch this version. In the past, there was a patch, but this version worked fine for me.
You will also need the Reiser tools.
Mike Chirico, a father of triplets (all girls) lives outside of
Philadelphia, PA, USA. He has worked with Linux since 1996, has a Masters
in Computer Science and Mathematics from Villanova University, and has
worked in computer-related jobs from Wall Street to the University of
Pennsylvania. His hero is Paul Erdos, a brilliant number theorist who was
known for his open collaboration with others.
Mike's notes page is souptonuts.